Linksys WAG54G User Manual
Page 21
14
Chapter 5: Configuring the Gateway
Overview
Wireless-G ADSL Gateway
•
VPN. To enable or disable IPSec and/or PPTP Pass-through, and set up VPN tunnels, use this screen.
Access Restrictions
•
Internet Access. This screen allows you to prevent or permit only certain users from attaching to your
network.
Applications & Gaming
•
Single Port Forwarding. Use this screen to set up common services or applications on your network.
•
Port Range Forwarding. To set up public services or other specialized Internet applications on your network,
click this tab.
•
Port Triggering. To set up triggered ranges and forwarded ranges for Internet applications, click this tab.
•
DMZ. To allow one local user to be exposed to the Internet for use of special-purpose services, use this
screen.
Administration
•
Management. On this screen, alter Gateway access privileges, SNMP, and UPnP settings.
•
Reporting. If you want to view or save activity logs, click this tab.
•
Diagnostics. Use this screen to do a Ping Test.
•
Factory Defaults. If you want to restore the Gateway’s factory defaults, use this screen.
•
Firmware Upgrade. Click this tab if you want to upgrade the Gateway’s firmware.
Status
•
Gateway. This screen provides status information about the Gateway.
•
Local Network. This provides status information about the local network.
•
Wireless. This screen provides status information about the wireless network.
•
DSL Connection. This screen provides status information about the DSL connection.