Listen Technologies Universal Rack Mounting Kit LA-326 - Manual (Page 10)

6
Information
Setup Instructions
Package Contents
Table of Contents
LA-326 Confi guration 3 Setup Instructions
Dual Units without Security Cover
figure A
1
2
Locate Parts
Locate parts A, C, D and and bag E. The remaining parts will not be used in this configuration.
Remove Screws
Remove the four outer screws from the bottom of the unit you are rack mounting.
3
Pick Sides
Determine which unit will be on the right side of the rack (unit “1”).
4
Install part C
Install part C to the right side of unit “1” using two screws from bag E. Again, use the set of holes
toward the front of the bracket, making this part flush with the front edge.
5
Install part A
Install part A to the left side of unit “2” using two screws from bag E. Again, use the set of holes
toward the front of the bracket, making this part flush with the front edge.
7
Remove Screw
Remove the screw that is near the remote antenna
connection on the rear of unit “2”.
Install part D
Install part D to both units using six screws
from bag E. See figure A.
8
Remove Screw
Remove the screw that is near input 1 connection on the rear of unit “1”. See figure A.
6
9
Mount
Mount in rack.