Land Pride ZXT60 User Manual
Page 52
50
Section 6: Specifications & Capacities
ZXT54 & ZXT60 Pro Zero Turn Mowers 357-271M
7/30/12
Front Tires
13 x 5 - 6, Ribbed tread with roller bearings
Hour Meter
Standard equipment
Fuel Capacities
12 US GAL
Steering Type
Hydrostatic Twin lever steering provides independent control of each drive wheel.
Twin Lever Steering Controls
Speed, forward, reverse, brake, and turns.
Steering Turning Radius
True zero degree. Turns with counter-rotating independent drive wheels.
Brake Service
Hydrostatic dynamic braking.
Park Brake Type
Manual activated over-center lever to wet disc brake.
Ground Speed
Forward: 0-11 MPH
Reverse: 0-5.5 MPH
Motor Drive
Single V-belt with electric clutch and spring tension idler pulley.
Wheel Drive
High torque piston type planetary reduction motors
Electrical Operated Logic-Control
Safety Features
Electric logic-control system governs blade engagement, forward & reverse motion,
engine starting & running, and parking brake functions.
Evaporative Emission Control
System on EPA Compliant Mowers
This equipment uses a sealed fuel system which incorporates a non-vented fuel cap.
Evaporative emissions are vented to the engine where they are combusted during
normal engine operation.
Seat Options
Deluxe cushion seat with arm rests
Optional Suspension seat with arm rest
Optional Deluxe seat with arm rest and spring Kit
Mainframe Construction
Welded steel
Drive Motor Mount
Fabricated from 3/16" steel plate.
Front Caster Wheels
Free turning with greasable roller bearings.
Front Caster Forks
5/16” steel.
Deck Thickness
10 Gauge deck with 11 gauge doubler plate
and 1/4" reinforcement plate at spindle housing mounts
Box-Section Reinforced Front Edge
11 ga. thick
Deck Trim Edges
Solid 1” x 3/8” steel bars for reinforced impact area
Deck Housing Depth
5 1/8” deep, (room for high-capacity mowing)
Deck Lift
Foot-operated deck height adjustment with locking pin for setting height.
Hand Operated Controls
Ignition switch, throttle lever, control levers, park brake, blade engagement switch,
choke knob and Fuel Tank Selector Valve.
Indicators
Engine warning light and hour meter for engine run time.
Cup Holder
Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size.
Cutting Height Adjustments
Height adjustment in 1/4" increments from 1” to 5”.
Mowing Blades
3 Heavy-duty, heat-treated, high-lift steel blades
.25" x 2 1/2" x 18.8"
.25" x 2 1/2” x 20.9”
Blade Tip Speed
18,515 FPM
18,700 FPM
Blade Drive
Single B-Section belt drive to all three spindles. Spring tension idler pulleys.
Blade Spindles
Machined ductile iron housing, 1 3/8" diameter high carbon steel shafts
and greasable ball bearings.
Deck Suspension
Four point suspension from frame by mechanical linkage with counter balance springs.
Anti-Scalp Rollers
4 Anti-scalp rollers to improve flotation in rolling and uneven terrain.
ZXT Pro (General Specifications)
Mower Model No
ZXT54
ZXT60