Lenovo IdeaPad Y460 - Manual (Page 44)

30
Chapter 2. Learning the basics
„ Connecting a universal serial bus (USB) device
Your computer comes with 3 USB ports and an eSATA/USB port
compatible with USB devices.
„ Connecting a Bluetooth device (specific models only)
If your computer has an integrated Bluetooth adapter card, it can connect to
and transfer data wirelessly to other Bluetooth enabled devices, such as
notebook computers, PDAs and cell phones. You can transfer data between
these devices without cables and up to 10 meters range in open space.
Enabling Bluetooth communications
1
Slide the integrated wireless device switch to .
2 Press Fn + F5 to make configuration.
Note: When using a high power consumption USB device such as USB ODD, use
the external device’s power adapter. Otherwise, the device may not be
recognized, or system shut down may result.
Note: The actual maximum range may vary due to interference and transmission
barriers. To get the best possible connection speed, place the device as near
your computer as possible.
Notes:
•
When you do not need to use the Bluetooth function, turn it off to save battery
power.
• For details on pairing with wireless devices, refer to their instructions.
• Pairing methods may vary by operating systems.