LG LST-4200A - Manual (Page 42)

42
Normal Operation
Channel Selection
You can select channels as described below.
Number and – (dash) buttons (on the Remote Control)
Use Number (0-9) and – (dash) buttons to select a channel directly.
FLASHBK button (on the Remote Control)
Press to return to the previous channel you viewed. For example, if the
DTV Receiver is tuned to channel 55 and then you change to channel 56,
pressing FLASHBK will return to channel 55.
SURF ( ) button (on the Remote Control)
Press to scroll through your favorite channels.
CH +/– buttons (on the Remote Control) or 3 / 4 (on the front panel)
Use CH +/– on the Remote Control or 3 / 4 on the front panel to cycle
the HDTV Receiver through the channels in memory.
Volume Adjustment
Adjusts the sound level for analog audio out on the HDTV Receiver. You must
set Audio Variable to On in the OPTION menu to use the Volume Adjustment.
See page 26.
VOL +/– buttons (on the Remote Control) or 1 1 / 2 2 (on the front panel)
Use VOL +/– on the Remote Control or 1 1 / 2 2 on the front panel to adjust
the sound level for analog audio out on the HDTV Receiver.
MUTE (on the Remote Control)
Press MUTE to turn off the volume for audio out on the HDTV Receiver.
otes
• Before setting Audio Variable to Off, make sure that you have turned down the TV’s
volume to the minimum. Otherwise, sudden high volume sound may cause hearing
or speaker damage.
• The volume for digital audio out on HDTV Receiver can not be adjusted on the
HDTV Receiver front panel.
Signal
Shows the signal strength bar for incoming signal to help you adjust the
antenna to the correct position for your location. You can view the signal
strength bar by pressing SIGNAL on the Remote Control.
ip
Refer to www.antennaweb.org for antenna position.
AntennaWeb.org, will help you determine the proper outdoor antenna to use
in order to receive television channels that are broadcast locally.
Freeze
Pressing the FREEZE button freezes the current image. Pressing the
FREEZE button once again returns the image to live video.
ote
The frozen image returns to live video after 5 minutes.
STB
GUIDE
STB
MODE
TV/INPUT
AUDIO CC SIGNAL
SELECT
ez ADD *
POWER
TV VCR DVD AUX
FLASHBK MUTE
RATIO
PROGRAM
STATION
FREEZE SURF HELP
PG DN
PG UP
SIGNAL button
STB
GUIDE
STB
MODE
TV/INPUT
AUDIO CC SIGNAL
SELECT SELECT
ez ADD *
POWER
TV VCR DVD AUX
FLASHBK MUTE
RATIO
PROGRAM
STATION
FREEZE SURF HELP
PG DN PG DN
PG UP PG UP
CH +/– buttons
SURF ( ) button
Number buttons
– (dash) button
FLASHBK button
STB
GUIDE
STB
MODE
TV/INPUT
AUDIO CC SIGNAL
SELECT
ez ADD *
POWER
TV VCR DVD AUX
FLASHBK MUTE
RATIO
PR PROGRAM OGRAM
ST STATION TION
FREEZE SURF HELP
PG DN
PG UP
FREEZE button
STB
GUIDE
STB
MODE
TV/INPUT
AUDIO CC SIGNAL
SELECT
ez ADD *
POWER
TV VCR DVD AUX
FLASHBK MUTE
RATIO
PROGRAM
STATION
FREEZE SURF HELP
PG DN PG DN
PG UP PG UP
VOL +/– buttons
MUTE button