Braun 7680 - Manual (Page 11)

11
B Clean&Charge
Braun Clean&Charge has been developed to auto-
matically clean and charge your shaver. It also serves as
a storage unit. For peak performance of your shaver,
clean it daily in the Clean&Charge.
During the automated cleaning process, the shaver is
switched on and off at intervals to obtain best cleaning
results. Since the specially formulated cleaning fluid also
contains a small amount of oil, the cleaning procedure
also fulfills the lubrication needs of your shaver.
Important
• Only use the power supply cord set supplied with the
shaver.
• In order to avoid any leakage of the cleaning fluid, place
the appliance on a flat, stable surface. Be careful not to
tip, move suddenly or transport in any way if a cleaning
cartridge is installed.
• Do not place the appliance in a mirror cabinet, nor store
it over radiators, nor place it on polished or laquered
surfaces. Do not expose to direct sunlight.
• The appliance contains highly flammable liquid.
Keep it away from sources of ignition. No smoking.
Keep out of reach of children. Do not refill cartridge. Use
only original Braun refill cartridge.
• When cleaning the shaver, its protection cap should be
removed.
Description
12 Lift button for cartridge exchange
13 Contact bow
14 Release button
15 Operation mode selector
16 «clean» light:
cleaning process indicator
17 «charge» light: charging process indicator
18 «cartridge» light: cartridge replacement indicator
19 Cleaning cartridge
Technical specifications
• Power consumption:
3 W when cleaning
7 W when charging
• Power supply: 100 -240 V 1 / 50 or 60 Hz
(automatic adaptation)
• Input voltage: 12 V
5491427_S 4-38 Seite 11 Donnerstag, 20. Dezember 2001 12:30 12