Land Pride AFM4522 - Manual

13
All Flex Mowers
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
Model AFM4522 All-Flex Grooming Mower
Description Specification / Capacity Description Specification / Capacity
Discharge Type Rear
Cutting Width 21’-9” Blade Drive Belt 1 C-Section
Overall Width 22’ -0” Drive Belt Tension Spring Loaded Idler with Overcenter
Release
Transport Height 11’-2” Blade Bearing Sealed Ball Bearings
Transport Width 9’-6” With Lock bar Installed Blades
3 Each Per Deck Low Lift (5/16" x 2 1/2" x 31 17/32")
Optional Blades:
Medium Lift, High Lift & Mulching
Overall Length 18’-6” Mowing Position
15’-2” Transport Position Blade Overlap 2 1/4"
Machine Weight 4,150 lbs. Blade Spindle Speed 2,241 R.P.M.
Tractor Horsepower Minimum 65 HP / Maximum 100 HP Blade Tip Speed 18,498 F.P.M.
Hitch Pull Type with Adjustable Clevis and
Safety Tow Chain Deck Tires 18 x 9.5 Air Tire, Sealant
Tongue Support 2,200 lb. Capacity Screw Jack Deck Wheel Spindles 1 1/4” w/Nylon Bushings
Gearbox Support 1/4” Steel Channel Transport Tires 2 each, P27560SR
Gearboxes 540 RPM (1)-Splitter & (3)-Wing Transport Locks Automatic with Pull Rope Release
Gearbox Oil Capacity Splitter: 2.5 pints
Wings: 3.5 pints
Wing Flex 23 Degrees Left To Right
22 Degrees Front To Back
Main Driveline (1) Category lV with Constant Velocity Center Deck Flex 10 Degrees Left To Right
22 Degrees Front To Back
Deck Drivelines (3) Category III with Slip Clutch Hydraulic Outlets 1 Set Required
Cutting Height 3/4" to 5 1/4" (In 1/4” increments) Deck Cylinders Dual Acting
Deck Size & Quantity 3 each @ 90” Gauge Wheel Arms 1/4” Wall Square Tubing
Deck Overlap 4 1/2” Turning Radius Zero Turning Radius
Deck Thickness 3/16” Mowing Capacity
@ 2 mph
@4 mph
@ 6 mph
5.27 Acres Per Hour
10.54 Acres Per Hour
15.82 Acres Per Hour
Anti-Scalp Roller Front Center of Each Deck
315-360S continued on next page 11/14/08
AFM4522 Specification Drawing