Linksys CallManager 7920 - Manual (Page 37)

Basic Call Handling
Cisco Wireless IP Phone 7920 for Cisco CallManager 31
Placing Calls on Hold
You can have only one active call at a time, so you
must place calls on hold while you answer another
call.
Tip
Avoid putting a conference call on Hold because
activating Hold usually generates music.
If you want to... Then...
Place a call on
hold During a connected call, press
Hold. The label changes to
Resume.
Resume a held call Press Resume to reconnect to a
holding call.
Choose between
two connected
calls Scroll between different calls that
are displayed on the screen. See
Figure 3-1.