Life Fitness Heavy Duty Power Rack - Manual (Page 10)

10
STEP 3:
‰ LOOSELY assemble the TOP CROSS BEAM (10) and UPPER LEFT and RIGHT SIDE FRAMES (11 & 12) to the
FRONT LEFT and RIGHT UPRIGHTS (1 & 7) using six 1/2 X 4-1/2” BOLTS (3), ten 1/2” INT LOCK WASHERS (5),
two BACKING DOME WASHERS (4) and six 1/2” LOCK NUTS (6).
Note: An Upper Band Peg accessory is available for the HDPR8. Assemble the UPPER BAND PEG ACCESSORY (A)
to the FRONT LEFT UPRIGHT (1) at the same time as the TOP CROSS BEAM (10). Use the same hardware
with the exception of replacing the 1/2 X 4-1/2” BOLTS (3) with the provided 1/2 X 5” BOLTS (B).
12
11
3
1
7
10
5
4
6
B
5
A
1
4
8
10