LevelOne FBR-1402TX - Manual (Page 29)

LevelOne Broadband Router User Guide
Figure 19: TCP/IP Properties (Win 2000)
5. Ensure your TCP/IP settings are correct, as described below.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default
Windows setting. Using this is recommended. By default, the LevelOne Broadband Router
will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the LevelOne Broadband Router.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the
following changes.
• Enter the LevelOne Broadband Router's IP address in the Default gateway field and click
OK. (Your LAN administrator can advise you of the IP Address they assigned to the Leve-
lOne Broadband Router.)
• If the DNS Server fields are empty, select Use the following DNS server addresses, and
enter the DNS address or addresses provided by your ISP, then click OK.
26