Lumiscope 2220 - Manual (Page 8)

8
Measuring Temperature
Taking a temperature reading from an object:
• Press the POWER button to turn the device on.
• Press the MODE button for one second. Ensure the unit
is in Object Scan mode (this is shown on the LCD).
• Press and hold the SCAN button, while aiming at the
desired object. Neither a beep sound nor a flashing LED
will occur while in Object Scan mode. For best results,
maintain a distance of 6 cm ~ 8 cm (2 3 /
8
" ~ 3 1 /
8
") be-
tween the object and the Non-Touch Thermometer (see
Figure 6).
• Release the SCAN button and withdraw the thermometer.
Results will display on the LCD.