LCD Digital DGP2-641 - Manual (Page 9)

LCD Keypad 9
Figure 5.1: Programming User Access Codes
Enter your [ ACCESS CODE ] (System Master Code or User Access Code with Master
feature).
Press [0] to enter the Programming Menu.
From Programming Menu, press [ ACC ].
Enter the 2-digit User Number you want to program; press the [ T] button to scroll the
list of codes then press [ ACC ] once the desired code appears on the screen.
Enter a User Code within the brackets. Press the [ S] button to reach the User Options
screen.
NOTE: The User Code is a Personal Identification Number (P.I.N.).
Program the User Options by pressing the number on your keypad corresponding to the
User Option you wish to enable. The option is considered ON when the number
appears within the brackets
. Proceed to step 7 by pressing the [ S] button. For a
detailed description of the User Options refer to section 5.4 on page 11 .
Options [1] and [2] : Master Feature
[1] OFF = Master Feature disabled.
[1] ON, [2] OFF = User can only modify
User Access Codes.
[1] ON, [2] ON = User has full Master
rights. User can create, modify, and
program User options, User Access
Options and Area Assignments.
Option [3]: Duress
Option [4]: Bypass
Option [5]: Arm Only
Option [6]: Stay and Instant Arm
Option [7]: Force Arm
Option [8]: OFF - Access keypad’s
partitions only
Option [8]: ON - Access any partition
assigned to user