Using features, Special characters, Headsets – Lucent Technologies Telephone Call Handling Back Panels: Front Panels 4406D+ User Manual
Page 9
Using Features
EXT
0
0
#
0
0
#
7
8
2
Features that dial numbers automatically may need special
characters to allow for correct dialing or system response.
Inserts 1 5 second pause in the dial sequence.
Consecutive pauses are allowed.
P
appears on the display.
Sends switchhook flash. Must be first entry in
sequence.
F
appears on the display.
Used to signal end of dialing sequence for Auto Dial
buttons or to separate grouped digits. The
##
appears
on the display.
Stop
.
Halts dialing sequence to allow for system
response. (Requires manual restart.)
Special
Characters
Headsets for 4400-Series telephones allow one-touch operation,
hands-free. The headset plugs into the headset jack. Two
buttons are used for headset operation:
Headset Status. Press to switch between
headset and handset operation.
To program: + lift handset + + +
+
.
Headset Hangup. Press to disconnect a call.
The Headset/Hangup button is programmed by your System
Manager.
Headsets
Conf
Trnsfr
Headset Status
Headset /Hangup
Headset Status
Hold
#
#