Linn Kudos - Manual (Page 27)

20
Tuning directly to a station
If you know the frequency of the station you want to listen to you
can select it from the front panel, or enter it directly from the
remote control.
To tune directly to a station
9 1 .1
STEREO
FM
9 1 .2
STEREO
FM
Press the TUNING button on the front panel (TUN on the Sneaky
KUDOS) until the scan and preset lights disappear and the current
frequency is displayed.
Use the < and > keys to tune to the frequency you want to select.
Press and hold down the < or > key to tune quickly through the
frequencies.
Tuning is performed in steps of 100kHz (Europe) or 50kHz (USA).
Remote: Press the TUNE button to select tuning mode and then
use the + or - keys to move up or down in frequency.
To enter a frequency directly
You can use the remote control to tune by entering a frequency
directly.
If you have been controlling another source, such as a CD player,
first select the tuner by pressing TUN on the remote control (or
WHERE for a Sneaky KUDOS).
Press the TUNE key to select tuning mode.
Then type the frequency in 50kHz steps. For example, to enter
101.7MHz key 10170, or to enter 99.95MHz key 9995.