Linn Kudos - Manual (Page 16)

9
Connecting the mains supply
Connect the KUDOS Tuner to a mains supply using the mains cord
supplied with it.
Note that the KUDOS Tuner should be switched off before
connecting or disconnecting any of the plugs on the rear panel, or
you may generate surges which could damage other components
in your hi-fi system.
Connecting the stand-alone KUDOS Tuner audio output
The stand-alone KUDOS Tuner provides two pairs of phono audio
outputs. Connect one pair of outputs to the radio or line input of
your preamplifier using the phono cables provided. The other pair
of outputs are provided to allow you to connect to a second
preamplifier or a multi-room system.
Connecting the Sneaky KUDOS Tuner
The Sneaky KUDOS Tuner is connected internally to the MAJIK
amplifier or WAKONDA preamplifier, and you do not need to make
any further audio connections.
Connecting the aerial
The KUDOS Tuner requires external FM and AM aerials to receive
stations on the corresponding wavebands. For more information
about choosing and positioning each type of aerial refer to the
next section, Choosing an aerial.