LG OCS 2007 IP8540 User Manual
Page 12
IP8540 User Guide
7
2.2 AC/DC power adaptor
The IP8540 ships without an AC/DC power adaptor. The IP8540 LAN Ethernet port supports IEEE802.3af
PoE (Power-over-Ethernet), so an external power supply is not needed if your Ethernet switch supports
PoE class 3. If the installation requires an AC/DC power adaptor, select the adaptor for your region from
the table below.
Order Part Number
Model Number
Applicable Region
TKTN9010201
PLA12R-120(ASK)-R USA
USA, Canada, Mexico
TKTN9010601
PLA12R-120(ASK-E)-R EUA
Europe
TKTN9010701
PLA12R-120(ASK-K)-R GBR
United Kingdom
TKTN9010801
PLA12R-120(ASK-S)-R AUS
Australia
TKTN9010901
PLA12R-120(ASK-C)-R CHN
China
TKTN9011001
PLA12R-120(ASK-H)-R KDX
South Korea
2.3 Optional accessory for wall-mount installation
The IP8540 optionally can be wall mounted; you may wish to order the following part number to ensure
secure placement of the handset when phone is wall mounted:
Order Part Number
Part Name
TKTN9013701
Handset Holder for Wall Mount
2.4 Set-up
Before connecting your new phone, take a moment to consider safety and reliability. Use common sense
when locating, connecting and using your IP8540.
•
Locate the phone on a dry level surface. Keep the phone away from the edges of the surface to
avoid the phone falling off the edge.
•
Locate cables to avoid damage. For example, do not locate under rugs or carpet. Also, do not
locate cables between the desktop and walls where they may be crushed, damaging the insulation.
•
Check the cables regularly and, if damage is noted, disconnect the phone. Contact your local
representative for a replacement.
•
Should liquid spill on the Phone, disconnect the unit from power and the network.
•
Do not use during lightning storms. Lightning presents a rare but potential lethal shock hazard.
•
Clean IP8540 with a soft dry cloth; do not use liquid cleaners or sprays.
•
Only attach peripherals specified by LG-Nortel.
•
Always use caution when connecting to AC power. Use only with a properly grounded standard
AC power outlet and the AC/DC adaptor for the unit.