Little Wonder ZyAIR G-4100 - Manual (Page 22)

ZyAIR G-4100
22
Figure 22 Default Settings
Select Keep subscriber profiles to set the system
configuration back to the factory defaults but retain
subscriber account information. All other custom
configuration is erased.
Under Reset the system back to factory defaults
Click Apply to reset the ZyAIR’s configuration back
to the factory defaults (Table 3).
3.5 Test Your Internet Connection
Launch your web browser and navigate to www.zyxel.com. Internet access is just the beginning.
Refer to the User’s Guide for more detailed information on the complete range of ZyAIR features. If
you cannot access the Internet, open the web configurator again to confirm that the Internet settings
you configured in the Wizard Setup are correct.
4 Hardware Installation
4.1 Attaching Antennas
Follow the steps below to connect the supplied antennas.
1. Locate the antenna connectors on the sides of your ZyAIR.
2. Screw the antennas clockwise onto the antenna connectors. The antennas should be
perpendicular to the ground and parallel to each other.