Linksys Net2Phone EtherFast Cable/DSL & Voice Router BEFN2PS4 User Manual

Page 15

EtherFast

Cable/DSL & Voice Router powered by Net2Phone

Filters block specific internal users from accessing the Internet. You can set
up a filter through an IP address or a network Port number.

To Modify Filter Settings

• Enter the IP addresses you wish to filter into the IP address fields. The

users who have these IP addresses will not be able to access the Internet.

• You can also filter users by entering their network port number and protocol

(UDP, TCP or both). Enter the port numbers and protocol you want to filter
into the port numbers fields. Users who are connected to the Router will no
longer be able to access any port number listed there.

Filters

Instant Broadband

Series

3. Click

Upgrade Firmware. A new page will appear.

4. Enter your Router’s administration password into the Password Confirm

box.

5. Click

the

Browse button and find the firmware upgrade file that you

downloaded from the Linksys website. Double-click the upgrade file.
This will place the file into the “File Path:” box.

6. When the correct file is in the “File Path:” box, click the Upgrade button

and follow the instructions there. This will complete your firmware
upgrade.

Filters

For information on setting up your Net2Phone Account and how to make
phone calls using your account, refer to the Net2Phone section.