Lucent Technologies Voice Terminal 8410 - Manual (Page 8)

8
To send all calls (except priority calls) to coverage
1 While on-hook, press softkey below SAC
(for display users)
or Press
or Dial Send All Calls access code _______.
To cancel Send All Calls
1 While on-hook, press softkey below SAC
(for display users)
or Press
or Dial Send All Calls cancel code _______.
NOTE: To use this feature, your voice terminal must
be set for the Speakerphone (speak and listen)
feature.
To place/answer a call without lifting the handset,
or to use speakerphone with any feature
1 Press .
2 Place or answer call, or access selected feature.
3 Adjust speakerphone volume if necessary:
To raise the volume, press the right half of the
Volume control button labeled
; to lower the
volume, press the left half of the Volume control
button labeled
.
To prevent the other party from hearing you
1 Press .
•
Red Mute light goes on.
2 Press again to resume talking to party.
•
Red Mute light goes off.
To change from speakerphone to handset
1 Pick up handset and talk.
To change from handset to speakerphone
1 Press .
2 Hang up handset.
SEND ALL CALLS
SPEAKERPHONE
Send Calls
Send Calls
Speaker
Mute
Mute
Speaker
8410.qref.def3 Page 8 Monday, August 17, 1998 9:09 AM