beautypg.com

Troubleshooting guide, Specifications, English 91 – Kenwood KVT-725DVD-B User Manual

Page 46: English 90 english

background image

English 91

Troubleshooting Guide

English

90 English

Specifications subject to change without notice.

Monitor Section

Picture size..............................................6.95 inches wide

154.1(W)×87.1(H)mm

Display system ........................Transparent TN LCD panel
Drive system ..............................TFT active matrix system
Number of pixels....................336,960 (480H×234V×RGB)
Effective pixels ......................................................99.99%
Pixel arrangement......................RGB striped arrangement
Back lighting ....................Cold Cathode Fluorescent Tube

DVD Section

D/A Converter ............................................................24Bit
Decorder ............Linear PCM/Dolby digital/dts/MP3/WMA
Wow & Flutter ............................Below Measurable Limit
Frequency response

(Sampling frequency;96k) ........................20~44,000Hz
(Sampling frequency;48k) ........................20~22,000Hz
(Sampling frequency;44.1k) ......................20~20,000Hz

Total harmonic distortion (1k) ................................0.010%
Signal to Noise ratio..................................95dB (DVD 96k)
Dynamic range..........................................90dB (DVD 96k)
DISC Format........................DVD-Video/VIDEO-CD/CD-DA
Sampling frequency........................44.1kHz/48kHz, 96kHz
Quantifying bit number ....................................16/20/24bit

FM Tuner section

Frequency range (50kHz)..........................87.5~108.0MHz
Usable sensitivity (S/N=26dB) ..........................0.7µV/75Ω
Quieting sensitivity (S/N=46dB) ........................1.6µV/75Ω
Frequency response (±3.0dB) ......................30Hz~15kHz
S/N (dB) (MONO) ......................................................65dB
Selectivity (±400kHz) ..............................................≥ 80dB
Stereo separation............................................37dB (1kHz)

LW Tuner section

Frequency range (9kHz) ..........................153kHz~281kHz
Usable sensitivity ....................................................28dBµ

MW Tuner section

Frequency range (9kHz) ........................531kHz~1611kHz
Usable sensitivity ....................................................28dBµ

Video secetion

Color system of external video input ................NTSC/PAL
External video input level (RCA jacks) ..............1Vp-p/75Ω
External audio max input level(RCA jacks)............1V/22kΩ
Analog RGB input ..........................................0.7Vp-p/75Ω

Audio secetion

Maximum Power (Front&Rear) ..............................50W×4
Output power (Front&Rear)

(DIN 45324, +B=14.4V) ......................................30W×4

Preout level (V) ....................................................5V/10kΩ
Preout impedance ......................................................80Ω
Tone action

Bass........................................................100 Hz ±10 dB
Middle ......................................................1 kHz ±10 dB
Treble......................................................10 kHz ±10 dB

General

Operating voltage ....................................14.4V (11V~16V)
Current consumption ..................................................15A
Dimensions (W×H×D)

Main Unit Installation ..............182mm×53mm×165mm
Hideaway unit..........................265mm×30mm×195mm

Operational temperature range ......................-10°C~60°C
Storage temperature range ............................-20°C~85°C
Weight: Main unit ......................................................2.2kg

Weight

: Hideaway unit ..............................................1.4kg

Specifications

Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may
light incorrectly.

MP3/WMA source

Cannot play an MP3/WMA.

• The media is scratched or dirty.

The sound skips when an MP3/WMA is being played.

• The media is scratched or dirty.

• The recording condition is bad.

The MP3/WMA track time isn’t displayed correctly.

• ---

Can’t display the ID3 tag information correctly.

• Record is not made in conformity with the ID3 tag

version 1.x.

The following messages are displayed when certain problems are occurring in your system. Take
the recommended actions.

Hot Error

The protective circuit in the unit activates when the temperature inside the unit exceeds 60°C

(140°F), stopping all operation.
] Cool down the unit by opening the windows or turning on the air conditioner. As the

temperature falls below 60°C (140°F), the disc will start playing again.

Hold Error

The protective circuit in the unit activates when the temperature inside the automatic disc

changer exceeds 60°C (140°F), stopping all operation.
] Cool down the unit by opening the windows or turning on the air conditioner. As the

temperature falls below 60°C (140°F), the disc will start playing again.

Mecha Error

The disc player is malfunctioning.
] Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues

blinking or the disc cannot be ejected.

Disc Error

The unplayable discs is inserted.

Read Error

The disc is upside-down.
] Load the disc with the labeled side up.

The disc is quite dirty.
] Clean the disc, referring to the section on "Disc cleaning" (see page 6).

Region code Error

The DVD software encoded for other region code.

Parental level Error

The parental level is set to high levels.

Error 07 — 67

The unit is malfunctioning for some reason.
] Press the reset button on the unit. If the "Error ##" code does not disappear, consult your

nearest service center.

• Clean the media, referring to the CD cleaning of the

section on (see page 6).

• Clean the media, referring to the CD cleaning of the

section on (see page 6).

• Record the media again or use another media.

• There are times when it isn’t displayed correctly according

to the MP3/WMA recording conditions.

• Record in conformity with the ID3 tag version 1.x.

Also, the display may be incorrect if an MP3 file uses the
ID3 tag v1.x standard and if this standard has been
expanded after production of the machine software.

This manual is related to the following products: