Hands-free unit control, Quick dialing, Hands free setup – Kenwood KVT-725DVD-B User Manual
Page 42: Editing the phone book, English 83 english 82 english
English 83
English
82 English
Quick Dialing
You can register up to 3 phone numbers for
quick dialing.
To register a phone number:
See the
—
Continue to touch more than 2 seconds.
To call a phone number from memory:
—
Only a phone number can be registered for
Quick Dialing. Therefore, the destination
subscriber name and others are not displayed
during dialing.
P 3
P 1
P 3
P 1
Register the phone number
2
Display a phone number you wish to register
1
Hands Free Setup
The hands-free system can be set as follows.
Hands Free Set Up screen
1 Sets an automatic response time after call
termination.
2 Adjusts the microphone sensitivity.
3 Sets a ringing tone output position.
"Left": Outputs the tone from the front left-hand
side speaker.
"Right": Outputs the tone from the front right-hand
side speaker.
4 Synchronizes the GSM with the Phone Book of
optional KCA-HF521 unit.
5 Synchronizes the GSM with the SMS of optional
KCA-HF521 unit.
6 Returns to the GSM Control screen.
The "Phone Voice" of both "Left" and "Right" can
be turned On at the same time. But they cannot
be turned Off at the same time.
S e t Up
Display the SMS SetUp screen
H a n d s F r e e S e t U p
AUTO
FULL
Return
A u t o R e s ponse Time
L e f t
R i g h t
M I C s e n c e
Phone V o i c e
3 0 s e c
3 1
Book SYNC
SMS SYNC
2
1
2
1
3
3
4
5
6
Hands-Free Unit Control
Editing the Phone Book
You can edit data you have registered in the
Phone Book.
See the
select an item you wish to edit on the Phone Book
List screen.
The Edit Phone Number screen appears.
Edit Phone Number ("TEL Number Edit") screen
1 Enters a phone number.
2 Clears the input phone number.
All entry number are cleared if this key is touched
more than 1 second.
3 Returns to the Phone Book List screen.
4 Enters the phone number.
—
9
0
Enter a phone number
3
E d i t
Start editing
2
Name
Select an item you wish to edit
1
The phone number is registered, the Edit Name
("Name Edit") screen appears.
Edit Name ("Name Edit") screen
1 Shifts the cursor.
2 Enters a space.
3 Switches the character type.
The digits, accent and extended code characters,
and alphabets are switched each time it is
pressed.
4 Scrolls the keyboard display.
5 Enters a character.
6 Clears the character.
All entry characters are cleared if this key is
touched more than 1 second.
7 Enters the entry characters.
8 Returns to the Edit Phone Number ("TEL Number
Edit") screen.
The extended code characters are displayed only
when a cellular phone supporting the GSM
alphabets is connected.
Each of extended code characters (^, {, }, \, [, ], ¯,
|,
€) occupies a two-character memory space
when registered.
etc.
The editing completes and the Phone Book data is
updated.
O k
Register the phone number
6
a
Enter a name
5
O k
Register the phone number
4
Phone Book L i s t
Name
Name
Name
Name
E d i t
AUTO
FULL
1234567890
O k
Clear
Return
Num b e r Ed i t
1
2
3
4
5
6
7
8
0
9
#
*
+
0 1 2 3 4 5 6 7 8 9
O k
Clear
AUTO
FULL
Return
2
4
3
Name Ed i t
Ty p e
A a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
a
O k
Clear
AUTO
FULL
K E N W O O D
Return
Space
2
1
1
3
4
4
7
8
6
5
1