Menu system – Kenwood KDC-136 User Manual
Page 12
12
|
English
Menu system
Menu System
Setting beep sound during operation, etc.
functions.
The Menu system basic operation method is
explained here. The reference for the Menu items
and their setting content is after this operation
explanation.
1
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MEnU" is displayed.
2
Select the menu item
Push the Control knob towards [FM] or [AM].
Example: When you want to set the beep sound
select the "BEEP" display.
3
Set the menu item
Push the Control knob towards [
4] or [¢].
Example: When you select "BEEP", each time you
push the knob it alternates between "On
BEEP" or "OFF BEEP". Select 1 of them as
the setting.
You can continue by returning to step 2 and
setting other items.
4
Exit Menu mode
Press the [MENU] button.
⁄
• When other items those applicable to the basic
operation method above are displayed, their setting
content chart is entered. (Normally the setting listed at
the top of the chart is the original setting.)
Also, the explanation for items that are not applicable
(
step.
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display
Setting
"On BEEP"
Beep is heard.
"OFF BEEP"
Beep canceled.
43$
.&/6
Control knob
Menu display