Karcher KM 85/50 W B - Manual (Page 5)

Operating instructions KM 85/50 W B English
22
Push handle with bowden
cable and cover support
assembly
Lock swivel caster with parking
brake
1. Opening for push handle
2. Fastening for bowden cable
Push handle components
1. Push handle
A,B,C hexagon head screw (2x) with
lock nut (2x) and
washers (6x)
3. Push handle lock
4. Bowden cable
5. Lock ring for push handle
lock
11. Cover support
Feed push handle through the
left and right openings into
interior
Raise unit cover and have it held
up by a helper
Observe sequence!
Slip push handle lock (3) over the
bowden cable (4)
Then slide lock ring of push
handle lock (5) over bowden
cable (4)
Slip push handle lock (3) and
lock ring for push handle lock (5)
over push handle (1)
Slide push handle lock (3) up to
stop at the push handle, outside
the container
Position stop plate (6) behind the
bulge (7)
Position and centre screw (8) of
lock ring (5)
Screw (8) serves as a stop
Tighten screw (8)
Sequence from the inside to the
outside
Insert hexagon head screw (A)
with washer (B) from the inside
through bottom part of push
handle (10)
Slip washer (B) onto hexagon
head screw
Position push handle (1) outside
bottom part of push handle (10)
and insert screw (A)
Slip washer (B) onto hexagon
head screw
Warning!
The inner bowden cable (12)
must be laid below screw (A).