All reset mode – Kenwood TK-3200 User Manual
Page 40
32
ALL RESET MODE
At some point in time, you may desire to reset the transceiver
settings to their default values. This function will reset all
channels to their default frequencies, the VOX function to its
default status, and all keys to their default functions.
To reset the transceiver:
2
1
1
With the transceiver power OFF, press
and hold the PTT switch, the Lock key,
and the Scan key while turning the
transceiver power ON.
Continue to hold the keys until the LED
flashes orange one time.
Release the keys.
The keys must be released within 2 seconds, otherwise All
Reset Mode will cancel.
The transceiver announces “Confirm” and returns to normal
operation.