Konica Minolta C70hc - Manual (Page 6)

Equipped with various functions
to improve printing satisfaction.
With a 70 page per minute rate (Full colour: A4, horizontal), this high speed has an
edge even with printing on demand. High productivity and colour reproduction
bring you high-value added business.
High speed full colour printing, up to 70 pages per minute
Supports various sizes from 100 × 148 mm up to 330 × 487 mm (Ma ximum
printable range: 318 × 480 mm) A3 output with full crop marks and double sided
A4 output with crop marks are also possible.
Support on all trays for A3 full crop mark output
It is possible to switch between the dot screen and line screen outputs. You can
select the screen that best fits each job.
Switch between screens
The standard model is equipped with a mechanical de-curler that eliminates curls
and waves on the paper after printing. As an option, the ICE (Intercooler- Curl
Eliminator) system is also available which not only reduces curling but static
electricity build up as well.
Stable paper handling
High-value added in-line options are available such as side binding /centre
binding units, multi folding units, perfect binding units, multi punch units, etc.
Various finishing options
The IDC (Image Density Control) sensors read patches of CMYK on the intermediate
transfer belt. Depending on the result, maximum densities and halftone densities are
adjusted, and colour consistency is achieved from the first page to the final page.
Density sensor for colour consistency
Operator assistance for self-maintenance
V e r s a t i l e
Operator assistance is provided as part of our maintenance service [O.R.U.M.] to
help you carry out self-maintenance. You can minimize your down-time because
there is no need to wait for a service engineer.
*Not available in some areas.
6