KTM 250 SX - Manual (Page 34)

4-6C
Repair manual KTM 250 / 300 / 380
Art No 3206004 -E
Dismounting of the ignition (Kokusan)
– Hold the flywheel with the holding spanner 1 and undo the collar nut.
– Put the protection cover on the crankshaft thread, twist in the flywheel
extractor and remove the flywheel.
– Undo the 3 screws 2 and remove the stator together with the base
plate.
Dismounting of the ignition (SEM)
– Hold the flywheel with the special tool and undo the collar nut.
– Place protective cap on crankshaft thread.
– Twist in the flywheel extractor and remove the flywheel.
– Loosen the 3 collar screws 3 , and take base plate with stator out of
the casing.
1
2
3