Maintenance and inspection, Cleaning, Check points before repairing – Konica Minolta PULSOX 300 User Manual

Page 24: Ch eck po ints

eck

ints

Maintenance and Inspection

• Before using the instrument, make sure that there is no dam-

age to the instrument, no damage or wire-breakage in the

probe cable and the instrument operates correctly and safely.

Cleaning

• Dampen a soft cloth with neutral detergent or water, wipe

the instrument with it, then wipe off carefully with a dry cloth.

In this way, make sure the instrument is cleaned and never

use solvent. When cleaning, take care not to touch the con-

nector terminals. Touching them may break terminal pins,

resulting in breakdown or damage.

Check Points before repairing

Before taking any actions, check the following points ﬁ rst.

◆

If the abnormality continues to reappear, the instrument might

be faulty, so contact the nearest distributor or authorized service

facility.

��

� � � � � � � � � � � � � � � � � � � � � �

��

� � � � � � � � � � � � � � � � � � � �

��