KITCHENAID PROLINE 4KPCM050 - Manual (Page 32)

C
ARE
AND
C
LEANING
31
• If “E1” or “E2” appears on the brew timer display:
The Coffee Maker needs to be descaled. Unplug the Coffee
Maker for 30 seconds to reset the display, then plug it back in
again. See “Descaling” on page 29. If error codes continue to
appear after cleaning, see the KitchenAid Canada Warranty and
Service section on page 33.
• If “E3” appears on the brew timer display:
A button or switch is jammed. Unplug the Coffee Maker, press
or turn each switch and button several times, then plug the
Coffee Maker back in. (If the Coffee Maker has been stored or
used in a cool environment, warm the unit to normal room
temperature before doing this.) If “E3” appears again on the
display, repeat this procedure.
• If it requires more than 10 minutes to brew 12 cups
of coffee:
The Coffee Maker needs to be descaled. See “Descaling” on
page 29.
• If the brew timer display is not illuminated:
Check to see if the Coffee Maker is plugged in. If it is, unplug
the Coffee Maker, then plug it back in. If the brew timer display
remains dark, check the fuse or circuit breaker on the electrical
circuit the Coffee Maker is connected to and make certain the
circuit is closed.
TROUBLESHOOTING
AND
ERROR CODES
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.