KITCHENAID PROLINE 4KPCM050 - Manual (Page 16)

F
EATURES
AND
O
PERATION
15
To Enter Clock-Setting Mode
If the digits on the brew timer display are not flashing, enter the
clock-setting mode by turning the Program-Clock Switch clockwise
to the “Clock” position, then releasing. The hour digits will begin
to flash.
To Set The Clock
1. Press the “–” Timer Adjustment Button to decrease the hour
or the “+” Timer Adjustment Button to increase the hour. If a
Timer Adjustment Button is pressed and held, the hour digits
will scroll. The AM and PM icons will change when the hour
digits roll past “12”. Make certain the hour set is correct with
regard to AM or PM.
2. Once the hour is set, turn the Program-Clock Switch clockwise
to the “Clock” position, then release. The minute digits will
begin to flash.
3. Press the “–” or “+” Timer Adjustment Buttons to adjust the
minutes. If a Timer Adjustment Button is pressed and held, the
minute digits will scroll.
4. Once the minutes are set, turn the Program-Clock Switch
clockwise to the “Clock” position, then release. The minute
digits will stop flashing and the brew timer display will exit the
clock-setting mode.
Timer Adjustment Buttons