Kenwood KDC-PSW9531 User Manual
Page 43
English
|
43
• When you activate the Security Code function, it cannot
be released.
Note, your Security Code is the 4 digit number entered in
your "Car Audio Passport" in this package.
1
Enter Standby
Press the [SRC] button.
Select the "STANDBY" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security" is displayed.
3
Enter Security Code mode
Press the Control knob for at least 1 second.
When "Enter" is displayed, "CODE" is also
displayed.
4
Select the digits to enter
Push the Control knob towards [
4] or
[
¢].
5
Select the Security Code numbers
Push the Control knob towards [FM] or [AM].
6
Repeat steps 4 and 5, and complete the
Security Code.
7
Confirm the Security Code
Press the Control knob for at least 3 seconds.
When "Re-Enter" is displayed, "CODE" is also
displayed.
8
Do the step 4 through 7 step operation, and
reenter the security code.
"Approved" is displayed.
The Security Code function activates.
• If you enter a Code different from your Security Code,
you have to start over from step 4.
9
Exit Security Code mode
Press the [MENU] button.
Press the Reset button when the audio unit is
removed from the battery power source
1
Turn the power ON.
2
Do the step 4 through 7 step operation, and
reenter the security code.
"Approved" is displayed.
You can begin using the unit.
• If an incorrect code is entered, "Waiting" is displayed,
and the input prohibition periods shown in the table
below is generated.
After the input prohibition time lapses, "CODE" is
displayed, and you can reenter the code.
Number of times the
incorrect code was input
Input prohibited time
1
—
2
5 minutes
3
1 hour
4
24 hours
In Standby mode
Touch Sensor Tone
Setting the operation check sound (beep sound)
ON/OFF.
Display
Setting
"Beep: ON"
Beep is heard.
"Beep: OFF"
Beep canceled.
In Standby mode
Manual Clock Adjustment
• You can do this adjustment when the Clock> (page 44) is set as OFF. 1 Select Clock Adjustment mode Push the Control knob towards [ 4] or [ ¢]. Select the "Clock Adjust" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. 3 Adjust the hours Push the Control knob towards [FM] or [AM]. Adjust the minutes Push the Control knob towards [ 4] or [ ¢]. 4 Exit Clock adjustment mode Press the [MENU] button.
The clock display blinks.