KORG MR-1 - Manual (Page 13)

13
4. Playing back the demo project
The MR-1 contains a high-quality demo project that was recorded in DFF(DSDIFF) format.
Here's how to play back this project.
What is a project?
When you record on the MR-1, two files are created; an audio file and a project file (contain-
ing protection data and markers, etc.). These two files are collectively called a "project," and
can be operated on the MR-1 as if they were a single audio file. (
→p.44 "Hard disk structure
and files")
Playing back
When you've turned on the power, make sure that the demo project name is shown in the
upper part of the level meter screen, and press the play/pause button.
The demo project recorded on the MR-1 will play back.
Project Name
If something other than the demo project is shown, select the demo project as described in "Select-
ing and playing back a project/file" (p.18).
Pausing
During playback, press the play/pause button to pause at that location. When you press the
play/pause button once again, playback will resume from that location.
Stopping playback
During playback, press the stop button.
If you then press the play/pause button, playback will start from the beginning of the cur-
rently selected project/file.
Searching for a desired location during playback
During playback, you can hold down the rewind button to rewind while listening to the sound.
You can hold down the fast-forward button to fast-forward while listening to the sound.
If you assign marks to a project, you'll be able to move quickly to a desired point ( →p.21).
MR1_Text1_E.p65 06.11.22, 11:59 AM 13