Kompernass KH 2370 User Manual

Page 17

KH 2370

television, then check this by referring to the operating
instructions of your television.

NORMAL/PS

Picture format 4:3 Pan & Scan; when playing films with for-

mat 16:9, the left and right part of the picture are cut off.

This means that the height of the screen is utilized as far as

possible.

NORMAL/LB

Picture format 4:3; when playing films with format 16:9,

black bars can be seen on the upper and lower part of the
picture.

WIDE

Wide screen format16:9; when playing films with format

16:9 with 16:9 (1.78:1) wide screen televisions, the picture

appears without black bars on the upper and lower parts
of the picture and without the right and left part of the
picture being cut off.

Return to the list of the subitems.

Setting the language of the OSD menus

Select the subitem OSD LANG using the control buttons.

Here you can set the language in which the OSD menu

is displayed.

GENERAL PAGE

TV Display

OSD Lang

English

Scr Saver

French

German

Italian

Portuguese

Spanish

Main page

Select the requested language in the list of options us-

ing the control buttons.

Return to the list of subitems.

Switch on the screensaver

Select the subitem SCR SAVER using the control buttons.

Info:

The screensaver prevents a picture, which has been dis-

played for a long time, from being burned into the tel-

evision screen. If the screensaver is switched on, this will
automatically be shown as soon as

• the OSD menu is displayed for a longer period of

time on the television screen and

• at the same time no buttons are pressed on the re-

mote control/on the front of the combination unit.

Select between ON and OFF in the list of options using

the control buttons.

Return to the list of subitems. Select the subitem MAIN

PAGE using the control buttons, to return to the main
menu.

Loudspeaker settings

The subsequent settings apply to the sound reproduc-

tion by means of the surround loudspeakers and the sub-
woofer of the combination unit. If you would like to use
an external audio component for the sound reproduction
then you have to carry out the settings on this component.

Check the operating instructions to find out how to carry
out these settings on the audio component.

In order to get an optimal sound, it is necessary to adjust
the sound reproduction to

• the conditions at the installation location of the combi-

nation unit and

• your personal preferences

To do this:

Select the menu item SPEAKER SETUP in the main

menu. In the menu SPEAKER SETUP, the following is
displayed:

SPEAKER SETUP

Downmix

Stereo

Center

OFF

Rear
Subwoofer
Cntr Delay
Rear Delay

Test Tone

Select the subitems in the list one after the other:

DOWNMIX

Select the option STEREO, if you

• have connected the combination unit to a stereo tel-

evision and

• would not like to use the surround loudspeakers for

the sound reproduction or