Kenwood KDC-MP4026 User Manual
Page 21
Temporarily have reception switched from stereo to mono to
reduce multi-path noise when listening to the FM station.
Display
Setting
"CRSC ON"
The CRSC is ON.
"CRSC OFF"
The CRSC is OFF.
Strong electrical fields (such as from power lines) may cause
unstable sound quality when CRSC is turned ON. In such a situation,
turn it OFF.
CRSC (Clean Reception System Circuit)
A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves.
Display
Setting
"DSI ON"
LED flashes.
"DSI OFF"
LED OFF.
DSI (Disabled System Indicator)
1
Select Clock Adjustment mode
Press the [FM] or [AM] button.
Select the "CLK ADJ" display.
2
Enter Clock Adjust mode
Press the [
4] or [¢] button for at least 2 seconds.
The clock display blinks.
3
Adjust the hours
Press the [FM] or [AM] button.
Adjust the minutes
Press the [
4] or [¢] button.
4
Exit Clock adjustment mode
Press the [MENU] button.
Manual Clock Adjustment
— 21 —
Setting the operation check sound (beep sound) ON/OFF.
Display
Setting
"BEEP ON"
Beep is heard.
"BEEP OFF"
Beep canceled.
Touch Sensor Tone
KDC-MP4026_U.S 03.12.1 9:35 AM Page 21