Unloading the film, Automatic rewind, Mid-roll change (mrc) – Kodak C750 User Manual

Page 29

UNLOADING THE FILM

Automatic rewind

The camera automatically rewinds
the film into the cassette after the
last exposure.

1. Wait for the film to completely

rewind into the film cassette and
for the motor to stop running.

• When the motor stops running, the

frame counter (37) indicates “

0” on

the LCD panel (14).

2. Rotate the film-door lever (10) to open

the film door (18).

3. Remove the

film cassette
from the
camera and
reload with
new KODAK
ADVANTIX
Film.

• The FSI on the fully-exposed film

cassette is at

✖

(#3 position) and the

frame counter indicates “E” on the
LCD panel.

Mid-roll change (MRC)

You can remove your film in mid-roll and
later reload it and continue picture-taking.
The Film Status Indicator (FSI) on a
partially exposed film cassette is set
to

◗

(#2 position). When you reload the

film cassette into the camera, the
camera automatically advances the film
to the first unexposed frame. Film can be
rewound and reloaded until the last
picture is taken. The camera automati-
cally rewinds the film and sets the FSI
to

✖

(#3 position) when the last picture

is taken.