Kenwood RECEIVER KRC-36 - Manual (Page 26)

English
— 26 — — 26 —
Connecting Wires to Terminals
■ Power Control Terminal Connections
Power Control terminal
(Flat terminal)
4
Power Amplifier 6
The output of the Power Control terminal is switched along with
the power on/off switching of the unit.
This terminal can be connected to the P.CON (REMOTE) terminal
of the amplifier, or used as the power supply of the special
antenna adapter for Volkswagen cars. (MAX. 300 mA)
Antenna Cord (ISO) 2
Antenna Conversion
Adaptor (ISO–JASO)
(Accessory3)
1
Power control wire 5
Special antenna adapter
(For Volkswagen car)
(Commercially available)
3
Make sure that the unit is installed securely in place. If the unit is
unstable, it may malfunction (eg, the sound may skip).
Metal mounting
strap
(commercially
available)
Self-tapping
screw
(commercially
available)
Firewall or metal support
Screw (M4X8)
(commercially
available)
■ Installation
Bend the tabs of the
mounting sleeve
with a screwdriver or
similar utensil and
attach it in place.
Installation
KRC-394(E)_U.S r1 02.9.24 11:11 AM Page 26