Upgrading your firmware, Manually upgrade firmware – Kodak EX1011 User Manual
Page 28
22
www.kodak.com/go/support
Changing frame settings
Upgrading your firmware
Firmware is the software that runs on your frame. Upgrade the firmware so you
always have the newest features and improvements. To check for the latest version,
visit
NOTE: Upgrading the firmware returns the frame settings to factory defaults.
Manually upgrade firmware
Download the firmware to your computer, then upgrade your frame:
1 On your computer, go
2 Follow the screen directions to download the frame firmware to your computer.
3 Copy the IMG file to a memory card or USB flash drive, then insert into the frame;
or, connect your computer and frame with the USB cable and copy the IMG file
directly to the frame. See
4 With the IMG file on the frame, press Home
, then select Settings
and
press OK.
5 Select Upgrade Firmware and press OK to begin the upgrade.
When the upgrade is complete, your frame automatically restarts. If it doesn’t, press the
power switch on the frame to Off, then back to On.
IMPORTANT: Do not turn off the frame during the upgrade!