Kenwood UBZ-GR14 - Manual (Page 15)

12
ENGLISH
3 S
CANNING THE
FM B
AND
1 When you want to scan the FM radio band to find a
station, press and hold the
▲ or ▼ key for 0.5 seconds.
• The FM and SCAN icons blink and the transceiver scans
the FM radio band.
2 When a station is found, scan will pause at that station
for 10 seconds.
• To resume scanning before the 10 second timer elapses,
press the
▲ or ▼ key.
3 To end scan and keep the radio station that has been
found, press the PTT switch.
• Pressing the M key after finding a station will end scan and
return to the last station you were using.
4 M
AKING A
C
ALL
1 When you want to make a call on the FRS channel, first
press the M key to alert the other party that you are
about to make a call.
• The transmission indicator and CALL icon appear.
• This step is not necessary when you are responding to a
call, as the other party is already expecting a response.
2 Press and hold the PTT switch, hold the transceiver
about 3 inches (7 1/2 cm) from your mouth, then speak
into the microphone using your normal voice.
• The transmission indicator appears while you are
transmitting.
3 When you finish speaking, release the PTT switch.
• The transceiver returns to the FM radio band after 1 second.
Note: If you do not release the PTT switch after you finish talking, you
will not be able to receive any calls. Additionally, pressing the PTT
switch for extended periods will reduce the battery power.
UBZ-GR14 E 1-20 01.4.12, 9:35 AM 12