Kenwood UBZ-GR14 - Manual (Page 14)

11
ENGLISH
FRS/FM MODE
1 S
ELECTING AN
FRS C
HANNEL
Only one FRS station can be monitored while in FRS/FM
Mode. The channel monitored is the last channel you
used while in FRS Mode.
To select a channel, you must first enter FRS Mode, then
select a channel as described in “
1 Selecting a Channel”
on page 7.
While operating the transceiver, the FRS channel is
continuously monitored. When a signal is present, the
transceiver automatically switches to the FRS channel.
When the signal is finished, the transceiver will wait for
1 second before returning to the FM radio band.
2 S
ELECTING AN
FM S
TATION
1 Press the MODE key momentarily.
• The FM icon blinks.
2 Press the ▲ or ▼ key to increase or decrease the FM
station.
3 Once you have selected your desired station, press the
PTT switch.
• Pressing the M key after selecting a station will return to the
last station you were using.
UBZ-GR14 E 1-20 01.4.12, 9:35 AM 11