Kenwood CD-RECEIVER KDC-PS9060R - Manual (Page 22)

— 22 —
English
Disc control features
(See page 7)
Disc Search
Search forwards or backwards through the discs in a disc
changer until you reach the one that you want to listen to.
Making a Reverse Disc Search:
Press the DISC
–
button to display the desired disc number.
Each time the button is pressed, the displayed disc number
decreases by one.
Play starts at the beginning of the displayed disc.
Making a Forward Disc Search:
Press the DISC
+
button to display the desired disc number.
Each time the button is pressed, the displayed disc number
increases by one.
Play starts at the beginning of the displayed disc.
"LOAD" is displayed when discs are being exchanged on the disc
changer.
NOTE
The repeat play function is cancelled when you stop playing the
disc.
NOTE
Function of disc changers
Track Scan Function
Successively play the beginning of each track on a disc until
you find the track that you want to listen to.
Turning Track Scan Function On/Off:
Press the SCAN button to switch the track scan function on
and off.
The first 10 seconds of each track are played, and the tracks
are played in order.
The track number currently being heard blinks in the display.
Stopping to Listen to the Track Being Scanned:
Press the 38 or SCAN button again to stop the scan and keep
on listening to a track normally.
• The track scan function is cancelled when you stop playing a
disc.
• The track scan function only scans each track on a disc once.
NOTE
Repeat playing the current track or disc.
Turning Repeat Play Function On/Off:
Press the REP button to switch the repeat play function on and
off as follows :
▼
Track Repeat ON
▼
Disc Repeat ON (Function of disc changers)
▼
Track/Disc Repeat OFF
The track number blinks in the display when the track repeat
function is on.
The disc number blinks in the display when the disc repeat
function is on.
Track / Disc Repeat Function