Kenwood DPF-J6030 - Manual (Page 26)

26
Programming tracks in desired order (PGM mode)
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
12:00
o PUSH OPEN )
Timer operation
As this unit incorporate the timer standby function, play-
back can be started at desired moment if a commercially
available audio timer is combined with this unit.
1
Set the power switches of the system compo-
nents to the ON positions.
÷ The disc number can be selected directly by using the DISC SELECTOR
button and numeric buttons in place of the DISC SKIP(DOWN/UP)
buttons.
Preparation
÷ Close the disc door. *
÷ Connect the system components so that
their power can be switched on by the timer.
÷ Read the instruction manual of the timer
carefully.
2
Select the disc to be played.
Previous disc Next disc
Within 8 seconds!
1Select the disc number.
2Play the disc.
Audio timer
To AC outlet
Receiver or amplifier
This unit Audio cable
3
Set the listening volume.
1Adjust the volume on the amplifier or receiver.
2Stop playback.
4
Set the timer for the desired ON time.
5
Set the TIMER PLAY switch to ON.
÷ Read the instruction manual of the timer carefully.
÷ When the set time comes, playback will start automatically.
÷ The playback mode will be TRACK mode.
Main unit
ENTER
6
TIMER PLAY
OFF ON
DISC SKIP
DOWN UP