Using the flash – Kodak C503 EN User Manual
Page 13
Taking pictures and videos
www.kodak.com/go/support
7
2 If the camera is not focusing on the desired subject (or if the framing marks
disappear), release the Shutter button, recompose the scene, and repeat step 1.
3 Press the Shutter button completely down to take the picture.
NOTE: Framing marks do not appear in Landscape or Video mode. When you use Focus
Zone (see
) and set Center Zone, the framing marks are fixed at Center Wide.
Using the flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.
Flash-to-subject distance
Zoom position
Flash distance
Wide angle
2–11.5 ft (0.6–3.5 m) @ ISO 140
Telephoto
2– 6.6 ft (0.6–2.0 m) @ ISO 140
Flash modes
Flash fires
Auto
Flash
When the lighting conditions require it.
Fill
Every time you take a picture, regardless of the lighting conditions. Use
when the subject is in shadow or is “backlit” (when the light is behind the
subject).
Red-
eye
Once, so the subject’s eyes become accustomed to the flash, then fires
again when the picture is taken. (If the lighting conditions require flash but
do not require Red-eye reduction, the flash may fire only once.)
Off
Never
Press the
The current flash mode is shown in the LCD
button repeatedly to scroll
through flash modes (see Flash modes below).
status area.