beautypg.com

General cleaning – KITCHENAID KERA807 KESI901 User Manual

Page 27

background image

27

Prepare Cooktop and Storage Drawer:

Remove plastic items from the cooktop because they may
melt.

Remove all items from the storage drawer.

How the Cycle Works

IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.

The Self-Cleaning cycle uses very high temperatures, burning soil
to a powdery ash.

The oven is preset for a 2

hour 30 minute clean cycle, however

the time can be changed. There are five levels of clean.
Suggested clean times are 2 hours 30 minutes for light soil and
between 3

hours 30 minutes to 4 hours 30 minutes for average to

heavy soil. Use the following chart as a guide to determine the
desired cleaning level.

Once the oven has completely cooled, remove ash with a damp
cloth. Do not wipe down any of the inside surfaces until the oven
has completely cooled down. Applying a cool damp cloth to the
inner door glass before it has cooled completely could result in
the glass breaking.

The oven light will not work during the Self-Cleaning cycle.

On some Canadian models, the surface elements will not work
during the Self-Cleaning cycle.

To Self-Clean:

Before self-cleaning, make sure the door is closed completely or
it will not lock and the cycle will not begin.

1. Press SELF CLEAN to set a clean time other than 2

hours

30 minutes. The clean time can be set between 2 hours
30 minutes

and 4 hours 30 minutes.

2. Press START.

The oven door will automatically lock and “DOOR LOCKED”
or “LOCKED,” the start time and stop time will appear on the
oven display. On some models, the clean time will appear on
the oven display.

The door will not unlock until the oven cools.

When the cycle is complete and the oven cools, “End” will
appear on the oven display and “DOOR LOCKED” or
“LOCKED” will disappear from the display.

3. Press any pad or open the oven door to clear the oven

display.

To Delay Start Self-Clean:

Before delay starting Self-Clean, make sure the clock is set to the
correct time of day. See “Clock” section. Also, make sure the
door is closed completely or it will not lock and the cycle will not
begin.

1. Press SELF CLEAN to set a clean time other than 2

hours

30 minutes. The clean time can be set between 2 hours
30 minutes

and 4 hours 30 minutes.

2. Press STOP TIME.

3. Press the number pads to enter the time of day to stop.

4. Press START.

The start time is automatically calculated and displayed. The
door will automatically lock, and “DOOR LOCKED” or
“LOCKED” and “DELAY” and the stop time will also appear
on the display (on some models). The door will not unlock
until the oven cools.

When the start time is reached, the oven will automatically
turn on.

When the cycle is complete and the oven cools, “End” will
appear on the oven display and “DOOR LOCKED” or
“LOCKED” will disappear from the display.

5. Press OFF to clear the oven display.

To Stop Self-Clean any time:

Press OFF. If the oven temperature is too high, the door will
remain locked. It will not unlock until the oven cools.

If the oven temperature is too high after self-cleaning, then
“LOCKED” will appear on the display until the oven completely
cools.

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are off and
the oven and cooktop are cool. Always follow label instructions
on cleaning products. Soap, water and a soft cloth or sponge are
suggested first unless otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)

Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire appliance is cool. These spills
may affect the finish.

Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad: Gently clean around the model and serial number plate
because scrubbing may remove numbers.

STAINLESS STEEL (on some models)

NOTE: Do not use soap-filled scouring pads, abrasive cleaners,
Cooktop Polishing Creme, steel-wool pads, gritty washcloths or
some paper towels. Damage may occur, even with one-time or
limited use.

Rub in direction of grain to avoid damaging.

Stainless Steel Cleaner & Polish (sample included): See
“Assistance or Service” section to order.

Liquid detergent or all-purpose cleaner: Rinse with clean
water and dry with soft, lint-free cloth.

Vinegar for hard water spots

CLEANING LEVEL

TOTAL CLEANING TIME
(includes a 30 minute cool down time)

1 (Quick)

2 hours 30 minutes

2

3 hours

3 (Regular)

3 hours 30 minutes

4

4 hours

5 (Maxi)

4 hours 30 minutes