Kompernass KH 4168 - Manual (Page 5)

- 3 -
• Re-insert the plug of the connector power pack
q into the wall socket. If the string of lights
does not emit light, check to ensure that the new
bulb is correctly seated in the socket
y .
Risk of Injuries:
Should the glass body of a lamp detach itself or the
glass has broken:
• First, immediately remove the connector power
pack q from the wall socket! There is a risk to
life if the protruding filaments are touched.
• Carefully attempt to remove the pinned plug t
from the pinned socket y with long-nosed pliers
– under no circumstances should you use your
fingers. There is a risk of injury from broken
glass.
• Make contact with Customer Services if you do
not feel confident about it or were not successful
in your attempt.
Cleaning
Danger:
First, remove the connector power pack from the
wall socket. Failure to do so brings with it the risk of
a potentially fatal electric shock should you come
into contact with electrical parts or moisture permeates
the appliance.
After immediate use, first allow the bulb to cool
down.
• You can now clean the string of lights with a dry
cloth. Do NOT use liquids, they could permeate
into the pinned socket. Also, to avoid damage
to the plastic surfaces, do not use any form of
detergent.
Maintenance
This string of lights is maintenance-free, no effort is
required on the part of the user.
• Before taking it into use, check the string of lights
for visible exterior damage.
Disposal
Do not, under any circumstances, discard
the appliance in the household refuse.
This appliance is subject to the European Guidelines
2002/96/EG. Dispose of the appliance through
an approved disposal centre or at your community
waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM
www.kompernass.com
IB_KH4168_BK2191_LB6.qxd 03.04.2008 12:13 Uhr Seite 3