Kompernass KH 4168 - Manual (Page 4)

- 2 -
Technical data
Mains plug:
Input voltage :
230 V ~ 50Hz
Output voltage: 24 V ~
Output level: 5 VA
Protection Class: IP 44
Protection class: II /
Number of bulbs: 25 bulbs
Bulb type: 2 V / 0,136 W
Lamp spacing: 10 cm
Light string length: 11 M
Items supplied
String of Lights
Connector power pack
5 Replacement bulbs
Tool for the exchange of bulbs
Operating instructions
Appliance description
q Connector power pack
w Connector plug
e Retainer nut
r Bulb
t Pinned plug
y Pinned socket
Utilisation
• Check to ensure that the string of lights is unda-
maged and all parts and remnants of the packa-
ging are removed from it.
• Check to ensure that every pinned socket con-
tains a bulb. If not, insert replacement bulbs.
• Insert the connector plug w into the connector
power pack q .
• Push the retainer nut e over it and screw it tight.
• Drape the string of lights over the object to be
decorated.
• Insert the plug of the connector power pack q
into a wall socket to take the string of lights into
use.
• If the string of lights does not emit light:
Check that each individual bulb r is sitting firm-
ly in its pinned socket y and the plug of the po-
wer pack q is firmly held in the wall socket.
• Should individual lamps not emit light:
Replace them as described in the following.
Changing bulbs
Risk of personal injury!
• First, remove the connector power pack q from
the wall socket. The string of lights is "live" for as
long as the connector power pack
q is connected
to the power source. Risk of electrical shock!
• After immediate use, first allow the bulb to cool
down. Risk of Burns!
Caution:
The bulbs have a pinned socket, not a threaded socket!
Do not attempt to screw the bulbs out and do not
use any tools. If you do, the bulb glass could splinter.
Risk of injury!
• Remove the bulb r together with the pinned
plug t from the pinned socket y .
• For replacements, only use the type of bulb de-
tailed in the technical data. Using more power-
ful bulbs, or those with different wattages, could
lead to the other bulbs becoming too hot or to
an overload of the power cable.
• Insert the new bulb r complete with its pinned
plug t into the pinned socket y . The pinned
plug t is at the lead, thus the bulb cannot be
incorrectly inserted.
IB_KH4168_BK2191_LB6.qxd 03.04.2008 12:13 Uhr Seite 2