Kodak DVD755VR/05 - Manual (Page 19)

English
19
Before Operation (Continued) - DVD part
Sound
Digital Audio Output
Each DVD disc has a variety of audio output options. Set
the DVD+VCR’s Digital Audio Output according to the
type of audio system you use.
DOLBY DIGITAL/PCM:
Select DOLBY DIGITAL/PCM if you connected the
DVD+VCR’s DIGITAL AUDIO OUT jack to a Dolby
Digital decoder (or an amplifier or other equipment with
a Dolby Digital decoder).
Stream/PCM:
Select Stream/PCM if you connected the DVD+VCR’s
DIGITAL AUDIO OUT jack to an amplifier or other
equipment with a DTS decoder, Dolby Digital decoder or
MPEG decoder.
PCM: Select when connected to a 2 channel digital stereo
amplifier.The DVD+VCR output sounds in the PCM 2ch
format when you play a DVD video disc recorded on the
Dolby Digital, MPEG1, or MPEG2 recording system.
Sample Frequency
To change the Sample Frequency setting, first select the
desired Digital Audio Output as indicated as above.
If your receiver or amplifier is NOT capable of handling
96KHz signals, select 48KHz.When this choice is made,
this unit will automatically convert any 96KHz signals to
48KHz so your system can decode them.
If your receiver or amplifier is capable of handling 96KHz
signals, select 96KHz.When this choice is made, this unit
will pass each type of signal through without any further
processing.
Others
The DRC,Vocal, PBC and Auto Play settings can be
changed.
● Use v/V to select the desired item and press OK.The
setting of the selected item alternates between On and
Off.
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However, you
may wish to compress the dynamic range of the audio
output (the difference between the loudest sounds and
the quietest ones).Then, you may listen to a movie at a
lower volume without losing clarity of sound. Set DRC to
On for this effect.
Vocal
Set Vocal to On only when a multi-channel karaoke DVD
is playing.The karaoke channels on the disc will mix into
normal stereo sound.
PBC
Set Playback Control (PBC) to On or Off.
On:
Video CDs with PBC are played according to the
PBC.
Off:
Video CDs with PBC are played the same way as
Audio CDs.
Auto Play
You can set up the DVD Player so a DVD disc
automatically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will search
a title that playback time is long most and then play back
the title automatically.
On:
Auto Play function is activated.
Off: Auto Play function is not activated.
Note
The Auto Play function may not work for some DVDs.
DVD
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Digital Audio Output
Others
Disc Audio DRC On
PBC On
Auto Play Off
Vocal On
Disc Subtitle
Disc Menu
Rating
Country Code
TV Aspect
Menu Language
Digital Audio Output
Others
Disc Audio DOLBY
DIGITAL /PCM
Stream/PCM
PCM
Sample Freq.
48 KHz
96KHz