English – Kodak DVD755VR/05 User Manual

Page 12

English

Before Operation - VCR part

Tuning in a video channel on your
TV

Video channel (RF output channel) is the channel on
which your TV receives picture and sound signals from the
DVD+VCR through the RF cable.

If you have used a

SCART

lead you will not have to tune

your TV, simply select the AV channel.The AV channel is
already pre-tuned for optimum video playback on your TV.

Perform the following steps only if interference appears in
the TV picture after you have moved to a different area or
a new station has started broadcasting in your area, or if
you change the connection from RF connection to AV
connection, or vise versa.

Turn on DVD+VCR and TV.

Set the vacant position 22 on your TV.

Press 1

1 on the remote control to enter the standby

mode (the clock indicator will be dimmed).

Press and hold REW or FWD on the
DVD+ VCR for more than 4 secs.

RF 36 will appear in the DVD+VCR display.
The following picture will be displayed on the TV screen.

If the picture is snowy, move to step 5. If the picture is
clean, press 1

1 on the DVD+VCR to finish.

Press REW or FWD on the DVD+VCR to set the
video channel to a vacant position between 22 and
68 which is not occupied by any local station in your
area.

Note

The RF channel will not change until step 6 has been
executed.

Press 1

1 to store the new RF video channel into the

DVD+VCR memory.

Now tune your TV set to the new DVD+VCR RF
channel.

Note

If the TV picture was clear in step 4, do not retune your
TV.

Using your DVD+VCR for the very first time

For the following steps we assume that you have just
connected your DVD+VCR for the very first time.
To make tuning TV stations an easy task your DVD+VCR
incorporates the Automatic Channel Memory System
(ACMS).This system will automatically tune and store TV
channels in your DVD+VCR.

Make sure that you have correctly installed your
DVD+VCR.
Press 1

1 to turn on your DVD+VCR.

If the initial Menu Screen doesn’t appear on screen,
make sure that you have tuned your TV to a video
channel. Or if this is correct it may mean that your
DVD+VCR is already tuned.

Press OK to start the automatic tuning process.

Press SYSTEM MENU to remove the menus from
the TV screen.

C02

PR-01

C03

PR-02

C04

PR-03

Pr-12

ACMS

ACMS

Pr-12

ACMS

RF CHANNEL 22

SET

P
R