Setting your printer as the default printer, Connecting to another kodak all-in-one printer – Kodak ESP 3260 User Manual
Page 11
www.kodak.com/go/aiosupport
5
KODAK ESP 3200 Series All-in-One Printer
Setting your
printer as the
default printer
If you have more than one printer, and after installation your all-in-one printer was
not the default printer, you can make your all-in-one printer your default printer.
For all computers and operating systems: If you haven’t yet installed the printer
software, insert the software CD that came with your printer and follow the
on-screen instructions to install the software.
For WINDOWS XP OS-based computers
1. Select
Start > Control Panel > Printers and Faxes.
2. Right-click your printer, and select
Set as Default Printer.
For WINDOWS VISTA OS-based computers
1. Select
Start > Control Panel > Hardware and Sound > Printers.
2. Right-click your printer, and select
Set as Default Printer.
For WINDOWS 7 OS-based computers
1. Select
Start > Control Panel > Hardware and Sound > Devices and Printers.
2. Right-click your printer, and select
Set as Default Printer.
For MACINTOSH Computers
When a new printer is installed, it becomes the default printer. If your all-in-one
printer is not the default printer:
1. From the dock, open
System Preferences.
2. In the
Hardware section, click Print & Fax.
3. Select your printer from the drop-down list next to
Default Printer.
Connecting to another KODAK All-in-One Printer
If you are connecting to a newer model printer (for example, you already have an
ESP 7 printer and now you adding an ESP 3250 printer), you must install the
software for the newer model.
If you are connecting to another ESP 3250 printer or to an older model:
• On a WINDOWS OS-based computer:
a. Select
Start > All Programs > Kodak > Kodak Printer Network Setup Utility.
b. If your all-in-one printer
is not listed:
• Select
No, my printer is not listed, then click Next.
• From the drop-down list, select your printer.
• Select
USB Cable - connect your cable now.
• Connect the USB cable to the computer and printer.
• Click
Next.
When your printer is detected, driver installation begins