Kenwood KVT-556DVD - Manual (Page 59)

English 59
Next page 3
Crossover Network Setup
You can set a crossover frequency of speakers.
1 Select the speaker to set the crossover
2
4
1 1
2
3
1 Sets the High Pass Filter of the front speaker.
2 Sets the High Pass Filter of the rear speaker.
3 Sets the Low Pass Filter of the sub woofer.
4 Switches to the crossover setup screen.
2 Display the Crossover setup screen
3 Set the crossover
5
6
7
5 Sets the cross over frequency.
When front speaker or rear speaker is
selected in step 1:
High Pass Filter adjustment
When Subwoofer is selected in step 1:
Low Pass Filter adjustment
6 Sets the sub woofer phase. (Only when
"Subwoofer" is set to "ON" in Audio Setup
and "LPF SUB FREQ" is set to other than
"Through")
7 Returns to the "Audio Setup" screen.
DVD Setup
You can set up the DVD play.
1 Display the DVD Setup screen
Touch in the "Setup
Menu" screen (page 58).
2 Setup each item
2
3
4
5
1
1 Moves to the "DVD Setup 2" screen.
2 Selects a disc menu language.*
1
(See , page 60)
3 Selects a subtitle language.* 1
(See , page 60)
4 Selects an audio language.* 1
(See , page 60)
5 Sets the dynamic range.* 1 ( "Wide")
The dynamic range is reduced by changing
from "Wide" to "Normal" and from "Normal"
to "Dialog". "Dialog" makes the total sound
volume becomes larger as compared with
"Wide" and "Normal", allowing you to listen
to the movie's dialog more clearly.
This is effective only when you are using a
Dolby Digital software.
The operation is available during the play
stop mode.