Konica Minolta Revio KD310Z - Manual (Page 49)

49
Using the REC Menu
(Cont’d)
Setting with the REC (DETAILS) Menu
- If you set your camera to REC (DETAILS) menu mode in advance, you can
make most of the menu settings. See page 88 for how to make mode
settings.
- Similarly, to learn how to enter the REC menu screens and how to select
menus, refer to “Setting with the REC (BASIC) Menu” on page 42.
- In the REC (DETAILS) menu mode, every time you press the
̄ or ̆ button
the menu cycles through the following screens:
RESET (
→ p.50)
QUALITY (
→ p.51)
MOVIE
EXPOSURE
(
→ p.53)
WHITE BALANCE (
→ p.54)
MONITOR
̄ DIGITAL ZOOM ̆ (→ p.55)
AE (
→ p.56)
SLOW SHUTTER (
→ p.57)
SEPIA (
→ p.58)
SETUP
RETURN
• When you are on a REC Menu screen, if you press
̇ or “RETURN” followed by the
MENU/SET button, you will leave the REC Menu mode and return to the through
image mode (picture shooting mode).
• The following menus are explained in the same way under “Setting with the REC
(BASIC) Menu”. (See the pages below for the appropriate explanation.)
• MOVIE (
→ p.45)
• MONITOR (
→ p.47)
• SETUP (
→ p.48)