Kenwood DDX7017 DDX7047 - Manual (Page 9)

English | 9
4 Video Source Selection/ V.OFF
[V.SEL] key
Video source selection changes in the following order
each time you press the key.
R-CAM *
Navigation *
TV */Video
* Optional accessory
You can also turn off the video display by pressing the
key longer than 1 second.
When you press the key again, the previous video
display comes back on.
5 Audio Source Selection/ Power Supply
[SRC] key
Audio source selection changes in the following order
each time you press the key.
Navigation *
TV */Video
AUX EXT *
* Optional accessory
You can also turn off the power by pressing the key
longer than 1 second.
When you press the key again,the power turns on.
6 Volume Controls
[VOL] key
Adjusts the volume.
7 Track/Station Selectors
[SEEK] key
Selects a music or chapter, track, or frequency.
8 Attenuator/Loudness
[ATT]/[LOUD] key
Attenuates the volume.
Press it again to cancel muting.
Press it for more than one second to turn the
Loudness function on or off.
If turned on, high and low tones are enhanced during
low volume.
9 Select Seek Mode
[AUTO] key
Selects the Seek mode. (See page 32/38/46/50 for the
)
p Screen Setup/ Dimmer
[SCRN] key
Displays the Screen Control or Tilt Control screen.
(page 57)
The Dimmer Mode Setup is set to
"Manual" in the
Screen Control screen, the Dimmer function turns On
or Off when the key is pressed more than 1 second.
(page 57)
q Function/ AV OUT SEL
[FNC] key
The video source function changes in the following
order each time you press the key.
Switches the source that is output at the AV OUTPUT
terminal when it is pressed more than 1 second.
w Switch Screen Mode/ M.CTRL
[MODE] key
Switches the screen mode. (page 14)
The DVD Disc Menu screen appears when you hold
down the key more than 1 second. (page 20)
• DVD Disc Menu is not available when the top menu of the DVD
is shown.
• Aside from the navigation system, the display turns on
when you apply the parking brake.
• It is necessary to set " Navigation Source " of
to " On " to add Navigation as an audio source that can be
selected the with [SRC] key. (page 67)
• It is necessary to engage the shift knob of car to
"Reverse" to switch to rear view camera
(R-CAM) video
display.